As everyone knows, our car has never been distinguished by silence in the cabin, and in order to at least slightly improve the situation, I also decided to carry out small work on the noise and vibration isolation of the car.
I started from the roof! And I know that the effect from it is minimal, but the whole car is in the plans, and since work is planned on the wiring in the doors and on the floor, the choice fell on the roof.
Finished view of vibration isolation
1) dismantled the ceiling (be careful with dismantling the visors and handles, the rest is intuitive)
2) thoroughly degrease everything
3) vibration isolation (I used noiseOff m2), it took exactly 15 sheets of 27x37
4) noise isolation (I used noiseoff sealant A15), it took 2 sheets
5) collect everything in reverse order!
I only notice the difference when it rains.
Roof costs: soundproofing - 1000 rubles, vibration isolation - 1800 rubles, time - 5 hours.
After all collected I have some free time and I took up the tailgate!
Door in vibration
Shumka on the door card
Door costs: soundproofing - 500 rubles. - 1 sheet, vibration isolation - 600 rubles. - 5 sheets, intiskrip tapes - 100 rubles. - 2 pcs.,
The main thing is to carefully roll the sheets so that there is no air left behind them.
The mode is sheets in size and without any extra effort and complexity we mount it on the roof of a car
Difficult areas with glue leftovers, so it's easier and the effect is the same
time — 40 min.
What tools and the process itself, I think, do not need to be described. Thank you for your attention
Mileage: 111063 mi. (178700 km.)
Category: car audio